How To Reset Ps3 Display Settings

Video Output Settings

Adjust the system's video output settings. Select the best output settings for the TV in use.

Bank check the resolution supported past your Goggle box.
Resolution (video fashion) varies depending on the Television set blazon. For details, refer to the instructions supplied with the TV.

Select (Settings) > (Display Settings).

Select [Video Output Settings].

Select the connector blazon on your Television.
Resolution (video mode) varies depending on the type of connector used.

Cable blazon	Input connector on the Idiot box	*Supported video modes 1**
HDMI Cablevision (sold separately)	HDMI	NTSC: 1080p / 1080i / 720p / 480p PAL: 1080p / 1080i / 720p / 576p
Component AV Cable (sold separately) D-Terminal Cable (sold separately)	Component D-Final *2	NTSC: 1080p / 1080i / 720p / 480p / 480i PAL: 1080p / 1080i / 720p / 576p / 576i
AV Cable (supplied) Due south VIDEO Cablevision (sold separately)	Composite S Video*three	NTSC: 480i PAL: 576i
AV MULTI Cable (sold separately) ［VMC-AVM250］ (a Sony Corporation product) AV Cable (supplied) Euro-AV Connector Plug (supplied) *4	AV MULTIfive SCARThalf-dozen	NTSC: 480p / 480i PAL: 576p / 576i

*1	The video mode options vary depending on the region where the PS3™ system was purchased. In North America, Asia and other NTSC regions, 480i video mode is displayed every bit [Standard (NTSC)]. In Europe and other PAL regions, 576i video mode is displayed every bit [Standard (PAL)]. For details, refer to the instructions supplied with the product.
*2	D-terminal is a connector type used mainly in Japan. The resolutions supported by D1 to D5 are as follows: D5: 1080p / 720p / 1080i / 480p / 480i D4: 1080i / 720p / 480p / 480i D3: 1080i / 480p / 480i D2: 480p / 480i D1: 480i
*3	South VIDEO is a format mainly used in Nippon.
*4	The Euro-AV connector plug is included only with PS3™ systems sold in Europe.
*5	AV MULTI is a format mainly used in Japan. If [AV MULTI / SCART] is selected, the screen allowing yous to select the type of output signal will be displayed.
*half dozen	SCART is a format mainly used in Europe. If [AV MULTI / SCART] is selected, the screen allowing you to select the type of output indicate will exist displayed.

Fix the 3D Telly display size.
Set the system to match the size of the screen of the Goggle box you are using.
If the TV you are using is non a 3D TV, or if y'all did non select [HDMI] in stride 4, this screen will not be displayed.

Change video output settings.
Modify the resolution for the video output. Depending on the connector type selected in step four, this screen may not be displayed.

Gear up the resolution.
Select all resolutions supported by the TV in apply. Video will automatically be output at the highest resolution possible for the content you lot are playing from among the selected resolutions.*
* The video resolution is selected in order of priority as follows: 1080p > 1080i > 720p > 480p/576p > Standard (NTSC:480i/PAL:576i).

If [Composite / S Video] is selected in step 4, the screen for selecting resolutions will not be displayed.
If [HDMI] is selected, y'all can also select to automatically suit the resolution (the HDMI device must be turned on). In this case, the screen for selecting resolutions will not exist displayed.

viii.

Set up the TV blazon.
Select the blazon of TV in utilize. Set when merely SD resolution (NTSC:480p / 480i, PAL: 576p / 576i) is to be output such as when [Composite / South Video] or [AV MULTI / SCART] is selected in stride 4.

Check your settings.
Confirm that the epitome displayed is at the correct resolution for the TV. You can go back to a previous screen and revise the settings by pressing the left push button.

ten.

Save your settings.
The video output settings are saved on the PS3™ system. Y'all can continue on to prepare sound output settings. For details on audio output, run into (Settings) > (Audio Settings) > [Audio Output Settings] in this guide.

Hints

If the video output settings do not match those required for the TV in employ, the screen may go blank when the resolution is changed. The screen should, however, automatically go back to its original resolution after a while. If the screen remains blank for more than 30 seconds, turn off the system. Then touch the power button on the system forepart for at least five seconds to plow the system on again. The video output settings volition automatically exist reset to the standard resolution.
If a device that is non uniform with the HDCP (High-bandwidth Digital Content Protection) standard is continued to the arrangement using an HDMI cable, video and/or audio cannot exist output from the system.
Copyright-protected content on a Blu-ray Disc can only be output at 1080p when using an HDMI cable connected to a device that is compatible with the HDCP standard.
When the PS3™ system (CECH-3000 / 4000 series) is connected to a TV using a D-concluding cable, a component AV cable, or an multi AV cable (a Sony Corporation product), counterpart high-definition output is restricted to comply with the copyright protection technology used by Blu-ray™ (AACS). BD video software (BD-ROM) and BDs recorded with copyright-protected video content (such as broadcast programs) are output at 480i.
Connect the system (CECH-4200 series or later) using an HDMI cable to output BD video software (BD-ROM) and BDs recorded with copyright-protected video content.